Installation Instruction download:
How to connect your LAVA Outdoor Antenna
We will recommend you to do a test by yourself using the cable we extra offer before you install the antenna outside of the building.
1. If you plug the AC Adapter and connect to the control unit box, you should first see a red light is on on your control unit box.
2. Once you connect the control unit box(a port on the box named ANT) to your antenna with a cable, now you should see the red light is on on your antenna. If not, you can test again with different cable to see if the problem is caused from the cable.
3. After making sure both red light are on, everytime when you press the button on the control unit box, you can see a green light is on on the control unit box and your antenna should be rotating.
Above is a self-test instruction. Basically, you can test to see if your antenna set works without connecting the antenna to your TV set unless you're testing if any signals picked up by the antenna.
After you assemble all the parts correctly, the antenna should rotate about 360 degree and stop then rotate reversely by pressing the button on the unit box.
Or you can change the direction by double clicking the button.
If your antenna didn't rotate, you can find out the problem easily from the steps above.
When you contact us asking for technical support, we appreciate if you can include a little details about which step above the error shows, so that we can more accurately diagnose the factor of problem your antenna might have.
For best result, the distance between the control unit box and your TV set should be within 20 ft. And the distance between the antenna and the control unit box should be within 50 ft.